diff --git a/docs/machines/3DPrinter/Step by Step Assembly.md b/docs/machines/3DPrinter/Step by Step Assembly.md
index d2bd19db91c52c48b15c9d6de50b7654cc832aad..b243b2a7a030423077c8433c580bb4501096b27c 100644
--- a/docs/machines/3DPrinter/Step by Step Assembly.md	
+++ b/docs/machines/3DPrinter/Step by Step Assembly.md	
@@ -67,13 +67,16 @@ The build instructions below are divided into two parts, namely pre-assembly and
 
 #### Step 1 - Insert 2x M3 nuts into printed XY Idler bracket
 
-| <img src="pictures/xy_idler/edited/C1_xy_idler.PNG" width="250" /><br>*Figure 2: Insert M3 nuts* | <img src="pictures/xy_idler/edited/C2_xy_idler.PNG" width="250" /> <br> *Figure 3: M3 nuts inserted* |
+| Insert M3 nuts into slots | M3 nuts inserted |
+| ---- | ---- |
+| <img src="pictures/xy_idler/edited/C1_xy_idler.PNG" width="250" /> | <img src="pictures/xy_idler/edited/C2_xy_idler.PNG" width="250" />
 
 #### Step 2 - Insert M3 bolts
 
-| <img src="pictures/xy_idler/edited/C3_xy_idler.PNG" width="250" /> <br> *Figure 4: Insert M3 bolts* | <img src="pictures/xy_idler/edited/C4_xy_idler.PNG" width="250" /> <br> *Figure 5: M3 bolts inserted* | 
-
-
+| Insert M3 bolts | M3 Bolts inserted |
+| - | - |
+| <img src="pictures/xy_idler/edited/C3_xy_idler.PNG" width="250" /> | <img src="pictures/xy_idler/edited/C4_xy_idler.PNG" width="250" /> | 
+| - Insert the M3x20mm bolt till the end but do not tighten now. It will be tightened in a later step when the 10mm smooth rod is inserted <br> - Insert the M3x30mm bolt only halfway through | 
 
 #### Step 3 - Insert first GT2 Pulley