From 8c03c401c127c5388c3d803b7dab630eb8a699f2 Mon Sep 17 00:00:00 2001
From: Mohammed Omer <momer93@hotmail.com>
Date: Thu, 22 Jul 2021 23:47:12 +0200
Subject: [PATCH] edi

---
 docs/machines/3DPrinter/Step by Step Assembly.md | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/docs/machines/3DPrinter/Step by Step Assembly.md b/docs/machines/3DPrinter/Step by Step Assembly.md
index d2bd19d..b243b2a 100644
--- a/docs/machines/3DPrinter/Step by Step Assembly.md	
+++ b/docs/machines/3DPrinter/Step by Step Assembly.md	
@@ -67,13 +67,16 @@ The build instructions below are divided into two parts, namely pre-assembly and
 
 #### Step 1 - Insert 2x M3 nuts into printed XY Idler bracket
 
-| <img src="pictures/xy_idler/edited/C1_xy_idler.PNG" width="250" /><br>*Figure 2: Insert M3 nuts* | <img src="pictures/xy_idler/edited/C2_xy_idler.PNG" width="250" /> <br> *Figure 3: M3 nuts inserted* |
+| Insert M3 nuts into slots | M3 nuts inserted |
+| ---- | ---- |
+| <img src="pictures/xy_idler/edited/C1_xy_idler.PNG" width="250" /> | <img src="pictures/xy_idler/edited/C2_xy_idler.PNG" width="250" />
 
 #### Step 2 - Insert M3 bolts
 
-| <img src="pictures/xy_idler/edited/C3_xy_idler.PNG" width="250" /> <br> *Figure 4: Insert M3 bolts* | <img src="pictures/xy_idler/edited/C4_xy_idler.PNG" width="250" /> <br> *Figure 5: M3 bolts inserted* | 
-
-
+| Insert M3 bolts | M3 Bolts inserted |
+| - | - |
+| <img src="pictures/xy_idler/edited/C3_xy_idler.PNG" width="250" /> | <img src="pictures/xy_idler/edited/C4_xy_idler.PNG" width="250" /> | 
+| - Insert the M3x20mm bolt till the end but do not tighten now. It will be tightened in a later step when the 10mm smooth rod is inserted <br> - Insert the M3x30mm bolt only halfway through | 
 
 #### Step 3 - Insert first GT2 Pulley
 
-- 
GitLab