diff --git a/docs/machines/3DPrinter/Step by Step Assembly.md b/docs/machines/3DPrinter/Step by Step Assembly.md
index a7c73b0236756ddc55e974f73c3819678bf8c243..79ce3b3e2115104c22e102d1b2d54666020b547c 100644
--- a/docs/machines/3DPrinter/Step by Step Assembly.md	
+++ b/docs/machines/3DPrinter/Step by Step Assembly.md	
@@ -11,7 +11,7 @@ The build instructions below are divided into two parts, namely pre-assembly and
 
 | Smooth Idler Pulley | Drive Pulley | Heatset Insert | Set Screw |
 | ---- | ---- | ---- | ---- |
-| <img src="pictures/hardware_smooth_idler.PNG" width="300" /> | <img src="pictures/hardware_drive_pulley.PNG" width="300" /> | <img src="pictures/hardware_heatset_insert.PNG" width="300" /> | <img src="pictures/hardware_setscrew.PNG" width="300" /> |
+| <img src="/docs/machines/3DPrinter/pictures/hardware_smooth_idler.PNG" width="300" /> | <img src="pictures/hardware_drive_pulley.PNG" width="300" /> | <img src="pictures/hardware_heatset_insert.PNG" width="300" /> | <img src="pictures/hardware_setscrew.PNG" width="300" /> |
 | Smooth idler pulley has free rolling bearings with the smooth side of the backside of a timing belt moves on a smooth idler pulley | Drive pulley sits on a motor shaft and is always teethed. Comes with two set screws that need a allen wrench to tighten the pulley onto the shaft | Heatset inserts have ridges on the outside and a female thread on the inside. They are pressed into printed parts using a soldering iron | Set screws are headless screws with external threads and a hex key on one side. Found on drive pulleys and in the L brackets to join two aluminium profiles |