From a32fbd1fe295011a9b122bf67fe3e98556321b2d Mon Sep 17 00:00:00 2001 From: Mohammed Omer <momer93@hotmail.com> Date: Mon, 30 Aug 2021 21:32:25 +0200 Subject: [PATCH] m --- docs/machines/3DPrinter/Step by Step Assembly.md | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/docs/machines/3DPrinter/Step by Step Assembly.md b/docs/machines/3DPrinter/Step by Step Assembly.md index 08bf5ef..6a6b3fe 100644 --- a/docs/machines/3DPrinter/Step by Step Assembly.md +++ b/docs/machines/3DPrinter/Step by Step Assembly.md @@ -4,13 +4,15 @@ The build instructions below are divided into two parts, namely pre-assembly and ## Hardware -| Part | Picture | -| ---- | ---- | -| **Button Head Cap Screw (BHCS)** - These screws have a hex head and require an allen wrench | <img src="pictures/hardware_bhcs.PNG" width="300" /> | -| **Socket Head Cap Screw (SHCS)** - These screws have a hex head that require an allen wrench | <img src="pictures/hardware_shcs.PNG" width="300" /> | -| **DIN 433 M3 Washer** - Thin precise washers that are used as spacers between idler pulleys | <img src="pictures/hardware_washer.png" width="300" /> | +| Button Head Cap Screw (BHCS) | Socket Head Cap Screw (SHCS) | DIN 433 Washer | Teethed Idler Pulley | +| ---- | ---- | ---- | ---- | +| <img src="pictures/hardware_bhcs.PNG" width="250" /> | <img src="pictures/hardware_shcs.PNG" width="250" /> | <img src="pictures/hardware_washer.PNG" width="250" /> | <img src="pictures/hardware_teethed_idler.PNG" width="300" /> | + +**Button Head Cap Screw (BHCS)** - These screws have a hex head and require an allen wrench +**Socket Head Cap Screw (SHCS)** - These screws have a hex head that require an allen wrench | +| **DIN 433 M3 Washer** - Thin precise washers that are used as spacers between idler pulleys | | **Smooth idler pulley** - The smooth side of the backside of a timing belt moves on a smooth idler pulley | <img src="pictures/hardware_smooth_idler.PNG" width="300" /> | -| **Teethed Idler pulley** - The toothed side of a timing belt moves on a teethed idler pulley | <img src="pictures/hardware_teethed_idler.PNG" width="300" /> | +| **Teethed Idler pulley** - The toothed side of a timing belt moves on a teethed idler pulley | | **Drive pulley** - Sits on a motor shaft and is always teethed. Comes with two set screws that need a ##1.5 allen wrench | <img src="pictures/hardware_drive_pulley.PNG" width="300" /> | | **Heatset insert** - Brass insert with ridges on the outside and a female thread on the inside. They are pressed into printed parts using a soldering iron | <img src="pictures/" width="300" /> | | **Set screw** - Headless screws with external threads and a hex key on one side. Found on drive pulleys and in the L brackets to join two aluminium profiles | LINK | -- GitLab