diff --git a/docs/machines/3DPrinter/Step by Step Assembly.md b/docs/machines/3DPrinter/Step by Step Assembly.md
index 6a6b3fed45f113d2ad298e3eb954e4dc48c07902..b6bebde1e810c3186c6f6be68e2fd8e1f4ed7409 100644
--- a/docs/machines/3DPrinter/Step by Step Assembly.md	
+++ b/docs/machines/3DPrinter/Step by Step Assembly.md	
@@ -7,12 +7,11 @@ The build instructions below are divided into two parts, namely pre-assembly and
 | Button Head Cap Screw (BHCS) | Socket Head Cap Screw (SHCS) | DIN 433 Washer | Teethed Idler Pulley |
 | ---- | ---- | ---- | ---- |
 | <img src="pictures/hardware_bhcs.PNG" width="250" /> | <img src="pictures/hardware_shcs.PNG" width="250" /> | <img src="pictures/hardware_washer.PNG" width="250" /> | <img src="pictures/hardware_teethed_idler.PNG" width="300" /> |
+| **Button Head Cap Screw (BHCS)** - These screws have a hex head and require an allen wrench | **Socket Head Cap Screw (SHCS)** - These screws have a hex head that require an allen wrench | **DIN 433 M3 Washer** - Thin precise washers that are used as spacers between idler pulleys | **Teethed Idler pulley** - The toothed side of a timing belt moves on a teethed idler pulley | 
+
 
-**Button Head Cap Screw (BHCS)** - These screws have a hex head and require an allen wrench 
-**Socket Head Cap Screw (SHCS)** - These screws have a hex head that require an allen wrench | 
-| **DIN 433 M3 Washer** - Thin precise washers that are used as spacers between idler pulleys | 
 | **Smooth idler pulley** - The smooth side of the backside of a timing belt moves on a smooth idler pulley | <img src="pictures/hardware_smooth_idler.PNG" width="300" /> |
-| **Teethed Idler pulley** - The toothed side of a timing belt moves on a teethed idler pulley | 
+
 | **Drive pulley** - Sits on a motor shaft and is always teethed. Comes with two set screws that need a ##1.5 allen wrench | <img src="pictures/hardware_drive_pulley.PNG" width="300" /> |
 | **Heatset insert** - Brass insert with ridges on the outside and a female thread on the inside. They are pressed into printed parts using a soldering iron | <img src="pictures/" width="300" /> |
 | **Set screw** - Headless screws with external threads and a hex key on one side. Found on drive pulleys and in the L brackets to join two aluminium profiles | LINK |