From bcdc6be16f411962bb28507f09b2846d6b71c495 Mon Sep 17 00:00:00 2001 From: Mohammed Omer <momer93@hotmail.com> Date: Thu, 22 Jul 2021 23:51:51 +0200 Subject: [PATCH] ed --- docs/machines/3DPrinter/Step by Step Assembly.md | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/docs/machines/3DPrinter/Step by Step Assembly.md b/docs/machines/3DPrinter/Step by Step Assembly.md index b243b2a..c7d9fb6 100644 --- a/docs/machines/3DPrinter/Step by Step Assembly.md +++ b/docs/machines/3DPrinter/Step by Step Assembly.md @@ -67,15 +67,13 @@ The build instructions below are divided into two parts, namely pre-assembly and #### Step 1 - Insert 2x M3 nuts into printed XY Idler bracket -| Insert M3 nuts into slots | M3 nuts inserted | -| ---- | ---- | -| <img src="pictures/xy_idler/edited/C1_xy_idler.PNG" width="250" /> | <img src="pictures/xy_idler/edited/C2_xy_idler.PNG" width="250" /> +| Step 1.1 - Insert M3 nuts into slots | Step 1.2 - M3 nuts inserted | Step 2.1 - Insert M3 bolts | Step 2.2 - M3 Bolts inserted | +| - | - | - | - | +| <img src="pictures/xy_idler/edited/C1_xy_idler.PNG" width="300" /> | <img src="pictures/xy_idler/edited/C2_xy_idler.PNG" width="300" /> | <img src="pictures/xy_idler/edited/C3_xy_idler.PNG" width="300" /> | <img src="pictures/xy_idler/edited/C4_xy_idler.PNG" width="300" /> | #### Step 2 - Insert M3 bolts +| -| Insert M3 bolts | M3 Bolts inserted | -| - | - | -| <img src="pictures/xy_idler/edited/C3_xy_idler.PNG" width="250" /> | <img src="pictures/xy_idler/edited/C4_xy_idler.PNG" width="250" /> | | - Insert the M3x20mm bolt till the end but do not tighten now. It will be tightened in a later step when the 10mm smooth rod is inserted <br> - Insert the M3x30mm bolt only halfway through | #### Step 3 - Insert first GT2 Pulley -- GitLab