From d71363925437fae4e2fa45bce8830cc5f43e46b0 Mon Sep 17 00:00:00 2001
From: Mohammed Omer <momer93@hotmail.com>
Date: Wed, 14 Jul 2021 12:41:26 +0200
Subject: [PATCH] BOM edited
---
docs/machines/3DPrinter.md | 186 ++++++++++++++++++++-----------------
1 file changed, 102 insertions(+), 84 deletions(-)
diff --git a/docs/machines/3DPrinter.md b/docs/machines/3DPrinter.md
index 8148424..112b9a1 100644
--- a/docs/machines/3DPrinter.md
+++ b/docs/machines/3DPrinter.md
@@ -599,95 +599,111 @@ The surface finish of 3d printed parts is generally good other than some ringing
## Final Assembly
1. Frame
1. Left side frame
+ 1. 3030 profile 500mm (2)
+ 2. 3030 profile 340mm (3)
+ 3. L bracket (6) with (2) set screws each
2. Right side Frame
+ 1. 3030 profile 500mm (2)
+ 2. 3030 profile 340mm (3)
+ 3. L bracket (6) with (2) set screws each
3. Left side to right side connection
+ 1. 3030 profile 340mm (4)
+ 2. L bracket (8) with (2) set screws each
4. Corner brackets installation
-2. Z-axis lower mounts
- - 2.1 M3x25 Bolts (1)
- - 2.2 M3 Nut (1)
- - 2.3 M5x10 Bolts (2)
- - 2.4 M5 Hammernut (2)
-3. 12mm rods insertion
+ 1. Corner brackets (12) each with:
+ 1. M6x10mm Bolt (2)
+ 2. M6 Hammer nut (2)
+2. Z-axis lower mounts (4)
+ 1. M3x25mm Bolt (1)
+ 2. M3 Nut (1)
+ 3. M5x10mm Bolt (2)
+ 4. M5 Hammernut (2)
+3. 12mm rods insertion in Z axis lower mounts
+ 1. 12mm smooth rod (4)
4. Build Platform Installation
- - 4.1 2020 Profiles (4)
- - 4.2 Corner Brackets 2020 (4)
- - 4.3 Z - Axis Bearing Holder (4)
- - 4.4 LM12UU Bearings (2)
- - 4.5 M5x10 Long Bolts (4)
- - 4.6 M5 2020 Hammer Nuts (4)
- - 4.7 3mm MK3 Heat Bed (1)
- - 4.8 Power Wires (2)
- - 4.9 NTC Thermistor (1)
- - 4.10 Kapton Tape (1)
- - 4.11 3mm Borosilicate Glass Plate (1)
- - 4.12 Z Nut Bracket M5x10 Bolts (4)
- - 4.12.1 M5 2020 Hammer Nuts (4)
- - 4.12.2 Trapezoidal Lead Screw Nuts (1)
- - 4.12.3 M3x12 Bolts (4)
- - 4.12.4 M3 Nut (4)
- - 4.13 Bed Bracket (4)
- - 4.13.1 M5x10 Bolts (2)
- - 4.13.2 M5 2020 Hammer Nuts (2)
- - 4.13.3 M3x40 Bolts with Springs (1)
- - 4.13.4 M3 Hand Tightening Nuts (1)
+ 1. 2020 Profile 340mm long (2)
+ 2. 2020 Profile 140mm long (2)
+ 3. Corner Brackets 2020 (4)
+ 1. M5x8mm Bolt (2)
+ 2. M5 Hammernut (2)
+ 4. Z-Axis Bearing Holder (4)
+ 1. LM12UU Bearing (2)
+ 5. M5x10 Long Bolts (4)
+ 6. M5 2020 Hammer Nuts (4)
+ 7. 3mm MK3 Heat Bed (1)
+ 8. Power Wires (2)
+ 9. NTC Thermistor (1)
+ 10. Kapton Tape (1)
+ 11. 3mm Borosilicate Glass Plate (1)
+ 12. Z Nut Bracket M5x10 Bolts (4)
+ 1. M5 2020 Hammer Nuts (4)
+ 2. Trapezoidal Lead Screw Nuts (1)
+ 3. M3x12 Bolts (4)
+ 4. M3 Nut (4)
+ 13. Bed Bracket (4)
+ 1. M5x10 Bolts (2)
+ 2. M5 2020 Hammer Nuts (2)
+ 3. M3x40 Bolts with Springs (1)
+ 4. M3 Hand Tightening Nuts (1)
5. Z axis upper mounts
- - 5.1 M3x25 Bolts (1)
- - 5.2 M3 Nut (1)
- - 5.3 M5x10 Bolts (2)
- - 5.4 M5 Hammernut (2)
+ 1. M3x25 Bolts (1)
+ 2. M3 Nut (1)
+ 3. M5x10 Bolts (2)
+ 4. M5 Hammernut (2)
6. Y-axis Left
- - 6.1 XY Stepper Motor Assembly (1)
- - 6.1.1 XY Stepper Motor (1)
- - 6.1.2 M3x20 Bolts (1)
- - 6.1.3 M3x8 Bolts (1)
- - 6.1.4 M3x10 Bolts (2)
- - 6.1.5 M3 Nuts (1)
- - 6.1.6 M5x10 Bolts (3)
- - 6.1.7 M5 Hammer Nuts (3)
- - 6.1.8 Nema 17 Motor (1)
- - 6.1.9 20 Teethed 5 mm Bore Pulley (1)
- - 6.2 XY Idler Assembly XY Idler (1)
- - 6.2.1 M3x30 Bolts (1)
- - 6.2.2 M3x20 Bolts (1)
- - 6.2.3 M3 Nuts (2)
- - 6.2.4 M5x10 Bolts (2)
- - 6.2.5 M5 Hammer Nuts (2)
- - 6.2.6 M3 Shim Wahser (4)
- - 6.2.7 3mm Bore GT2 Pulleys (2)
- - 6.2.8 LM10UU Bearings (1)
- - 6.2.9 340mm Wide 10mm Long Smooth Rod (1)
+ 1. XY Stepper Motor Assembly (1)
+ 1. XY Stepper Motor (1)
+ 2. M3x20 Bolts (1)
+ 3. M3x8 Bolts (1)
+ 4. M3x10 Bolts (2)
+ 5. M3 Nuts (1)
+ 6. M5x10 Bolts (3)
+ 7. M5 Hammer Nuts (3)
+ 8. Nema 17 Motor (1)
+ 9. GT2 20T teethed 5 mm Bore Pulley (1)
+ 2. XY Idler Assembly XY Idler (1)
+ 1. M3x30 Bolts (1)
+ 2. M3x20 Bolts (1)
+ 3. M3 Nuts (2)
+ 4. M5x10 Bolts (2)
+ 5. M5 Hammer Nuts (2)
+ 6. M3 Shim Wahser (4)
+ 7. 3mm Bore GT2 Pulleys (2)
+ 8. LM10UU Bearings (1)
+ 9. 340mm Wide 10mm Long Smooth Rod (1)
7. Y-axis Right
- - 7.1 XY Stepper Motor Assembly (1)
- - 7.1.1 XY Stepper Motor (1)
- - 7.1.2 M3x20 Bolts (1)
- - 7.1.3 M3x8 Bolts (1)
- - 7.1.4 M3x10 Bolts (2)
- - 7.1.5 M3 Nuts (1)
- - 7.1.6 M5x10 Bolts (3)
- - 7.1.7 M5 Hammer Nuts (3)
- - 7.1.8 Nema 17 Motor (1)
- - 7.1.9 20 Teethed 5 mm Bore Pulley (1)
- - 7.2 XY Idler Assembly XY Idler (1)
- - 7.2.1 M3x30 Bolts (1)
- - 7.2.2 M3x20 Bolts (1)
- - 7.2.3 M3 Nuts (2)
- - 7.2.4 M5x10 Bolts (2)
- - 7.2.5 M5 Hammer Nuts (2)
- - 7.2.6 M3 Shim Wahser (4)
- - 7.2.7 3mm Bore GT2 Pulleys (2)
- - 7.2.8 LM10UU Bearings (1)
- - 7.2.9 340mm Wide 10mm Long Smooth Rod (1)
+ 1. XY Stepper Motor Assembly (1)
+ 1. XY Stepper Motor (1)
+ 2. M3x20 Bolts (1)
+ 3. M3x8 Bolts (1)
+ 4. M3x10 Bolts (2)
+ 5. M3 Nuts (1)
+ 6. M5x10 Bolts (3)
+ 7. M5 Hammer Nuts (3)
+ 8. Nema 17 Motor (1)
+ 9. GT2 20T Teethed 5 mm Bore Pulley (1)
+ 2. XY Idler Assembly XY Idler (1)
+ 1. M3x30 Bolt (1)
+ 2. M3x20 Bolt (1)
+ 3. M3 Nuts (2)
+ 4. M5x10 Bolts (2)
+ 5. M5 Hammer Nuts (2)
+ 6. M3 Shim Wahser (4)
+ 7. 3mm Bore GT2 Pulleys (2)
+ 8. LM10UU Bearings (1)
+ 9. 340mm Wide 10mm Long Smooth Rod (1)
8. X-axis Assembly
- - 8.1 Y Carriage Assembly Y Carriage (2)
- - 8.1.1 3mm 20 Teethed Bore Smooth Idler Pulley (1)
- - 8.1.2 M3x30 Bolts (2)
- - 8.1.3 M3 Nuts (4)
- - 8.1.4 M3x40 Bolts (2)
- - 8.1.5 M3 Heat Sets Inserts (4)
- - 8.1.6 X-End Stop Flag (1)
- - 8.2 Y End Stop Flag (1)
- - 8.2.1 M3x6 Bolts (1)
- - 8.3 Y Carriage Clamps (4)
+ 1. Y Carriage Assembly (2)
+ 1. Y Carriage (1)
+ 2. GT2 20T Teethed 3mm Bore Smooth Idler Pulley (1)
+ 3. M3x30mm Bolt (2)
+ 4. M3 Nut (4)
+ 5. M3x30mm Bolt (2)
+ 6. M3 Heat Set Insert (4)
+ 7. X-End Stop Flag (1)
+ 2. Y End Stop Flag (1)
+ 1. M3x6mm Bolt (1)
+ 3. Y Carriage Clamps (4)
- 8.3.1 M3x16 Bolts (4)
- 8.4 LMUW10 Bearing (1)
- 8.5 8 mm Rods (2)
@@ -699,8 +715,8 @@ The surface finish of 3d printed parts is generally good other than some ringing
- 8.6.5 Belt Clamp (1)
- 8.6.6 Belt Clamp + X Cable Chain Connectors (1)
- 8.6.7 3mm Wide, 12mm Long Double Pins (4)
-9. XY Belt Installations
- - 9.1 1.4m Long Belts (2)
+9. XY Belts Installation
+ 1. 1.4m Long Belts (2)
10. Y Axis End Stop Installation
- 10.1 Endstop Bracket (1)
- 10.2 Endstop Housing (1)
@@ -720,6 +736,9 @@ The surface finish of 3d printed parts is generally good other than some ringing
- 11.5.2 M3x14 Bolts (2)
- 11.5.3 M3x8 Bolts (1)
12. Electronics plate
+ 1. MKS Controller board
+ 2. DC 12V Step Down
+ 3. LED Controller
13. PSU Mounting
14. Connect Wiring
15. Exhaust system
@@ -765,4 +784,3 @@ The surface finish of 3d printed parts is generally good other than some ringing
-
--
GitLab