From d84c6f4f89f9f1c78c53957f2c01855ffabf6b86 Mon Sep 17 00:00:00 2001 From: Mohammed Omer <momer93@hotmail.com> Date: Mon, 30 Aug 2021 21:11:14 +0200 Subject: [PATCH] m --- .../3DPrinter/Step by Step Assembly.md | 26 +++++++++---------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/docs/machines/3DPrinter/Step by Step Assembly.md b/docs/machines/3DPrinter/Step by Step Assembly.md index 44b46da..ea46b69 100644 --- a/docs/machines/3DPrinter/Step by Step Assembly.md +++ b/docs/machines/3DPrinter/Step by Step Assembly.md @@ -6,19 +6,19 @@ The build instructions below are divided into two parts, namely pre-assembly and | Part | Picture | | ---- | ---- | -| Button Head Cap Screw (BHCS) | <img src="/" width="350" /> | -| Socket Head Cap Screw (SHCS) | - | -| DIN 433 M3 Washer | - | -| **Smooth idler pulley** - The smooth side of the backside of a timing belt moves on a smooth idler pulley | - | -| **Teethed Idler pulley** - The toothed side of a timing belt moves on a teethed idler pulley | -1. **Drive pulley** - Sits on a motor shaft and is always teethed. Comes with two set screws that need a ##1.5 allen wrench -2. **Heatset insert** - Brass insert with ridges on the outside and a female thread on the inside. They are pressed into printed parts using a soldering iron -3. **Set screw** - Headless screws with external threads and a hex key on one side. Found on drive pulleys and in the L brackets to join two aluminium profiles. -4. L bracket - L shaped connector with 2 set screws, used to connect two profiles at a right angle. -5. 3030 angle connector - Aluminium connectors that connect profiles on the plane. Each angle connector requires 2 SHCSs and 2 hammer nuts -6. Allen wrench - Tool with a hex head to tighten Socket head cap screws SHCS -7. Flat head screwdriver - Tool to tighten flat head screws and found on the controller board and electronic wire terminals -8. Cross head screwdriver - Tool to tighten cross head screws and found on the controller board with electronic wire terminals +| **Button Head Cap Screw (BHCS)** - These screws have a hex head and require an allen wrench | <img src="/docs/machines/3DPrinter/pictures/hardware_bhcs.png" width="200" /> | +| **Socket Head Cap Screw (SHCS)** - These screws have a hex head that require an allen wrench | <img src="/docs/machines/3DPrinter/pictures/hardware_shcs.png" width="200" /> | +| **DIN 433 M3 Washer** - Thin precise washers that are used as spacers between idler pulleys | <img src="/docs/machines/3DPrinter/pictures/hardware_washer.png" width="200" /> | +| **Smooth idler pulley** - The smooth side of the backside of a timing belt moves on a smooth idler pulley | <img src="/docs/machines/3DPrinter/pictures/hardware_smooth_idler.png.png" width="200" /> | +| **Teethed Idler pulley** - The toothed side of a timing belt moves on a teethed idler pulley | <img src="/docs/machines/3DPrinter/pictures/hardware_teethed_idler.png.png" width="200" /> | +| **Drive pulley** - Sits on a motor shaft and is always teethed. Comes with two set screws that need a ##1.5 allen wrench | <img src="/docs/machines/3DPrinter/pictures/hardware_drive_pulley.png.png" width="200" /> | +| **Heatset insert** - Brass insert with ridges on the outside and a female thread on the inside. They are pressed into printed parts using a soldering iron | <img src="/docs/machines/3DPrinter/pictures/.png" width="200" /> | +| **Set screw** - Headless screws with external threads and a hex key on one side. Found on drive pulleys and in the L brackets to join two aluminium profiles | LINK | +| L bracket - L shaped connector with 2 set screws, used to connect two profiles at a right angle | LINK | +| 3030 angle connector - Aluminium connectors that connect profiles on the plane. Each angle connector requires 2 SHCSs and 2 hammer nuts | LINK | +| Allen wrench - Tool with a hex head to tighten Socket head cap screws SHCS | LINK | +| Flat head screwdriver - Tool to tighten flat head screws and found on the controller board and electronic wire terminals | LINK | +| Cross head screwdriver - Tool to tighten cross head screws and found on the controller board with electronic wire terminals | LINK | ## Pre-Assembly --- -- GitLab