From f85ea6e8f519a5601a14311d71c91f93992c6145 Mon Sep 17 00:00:00 2001
From: Mohammed Omer <momer93@hotmail.com>
Date: Sat, 28 Aug 2021 12:54:03 +0200
Subject: [PATCH] build manual edits
---
.../3DPrinter/Step by Step Assembly.md | 38 +++++++++++--------
1 file changed, 22 insertions(+), 16 deletions(-)
diff --git a/docs/machines/3DPrinter/Step by Step Assembly.md b/docs/machines/3DPrinter/Step by Step Assembly.md
index a73fcc5..bf0e425 100644
--- a/docs/machines/3DPrinter/Step by Step Assembly.md
+++ b/docs/machines/3DPrinter/Step by Step Assembly.md
@@ -464,27 +464,13 @@ Repeat exact same process as in previous Left Side frame subassembly
-### 2. Z-axis upper mounts installation (2)
-
-#### Parts required
-
- 1. Preassembled Z upper mount (2)
- 2. M5x12mm Bolt (4)
- 3. M5 Hammernut (4)
- 4. 62 mm spacer
- 5. Allen wrench #2.5
-#### Assembly process
-
-- Mount Z axis upper mount assembly with spacer placed to front side of frame
-- Insert M5x10 BHCS (2) with Hammer nut (2) into mount and tighten with #2.5 allem wrench
-- Repeat process on right side of frame
### 3. Z-axis lower mounts installation (2)
#### Parts required
-1. Preassembled Z lower mount (2)
+1. Preassembled Z axis lower mount (2)
2. M5x12mm BHCS (8)
3. M5 Hammernut (8)
4. 62 mm spacer (1)
@@ -492,11 +478,31 @@ Repeat exact same process as in previous Left Side frame subassembly
#### Assembly process
-Use X mm spacer to align lower Z mount
+- Use 62mm spacer to align lower Z mount to front side of frame
+- Tighten M5x12mm BHCS (4) pre-installed on lower Z mount
+- Install M5x12mm BHCS (2) with M5 hammer nut on underside of lower Z mount
+- Install the second lower Z mount on right side following above process
### 4. 8mm rods insertion in Z axis lower mounts
1. 8mm smooth rod (4)
+### 2. Z-axis upper mounts installation (2)
+
+#### Parts required
+
+ 1. Preassembled Z upper mount (2)
+ 2. M5x12mm Bolt (4)
+ 3. M5 Hammernut (4)
+ 4. 62 mm spacer
+ 5. Allen wrench #2.5
+
+#### Assembly process
+
+- Mount Z axis upper mount assembly with 62mm spacer placed to front side of frame
+- Insert M5x10 BHCS (2) with Hammer nut (2) into mount and tighten with #2.5 allem wrench
+- Repeat process for second Z axis upper mount on right side of frame
+
+
### 5. Build Platform Installation (1)
1. Heatbed (1)
1. 3mm MK3 Heat Bed (1)
--
GitLab