Step by Step Assembly.md

Build Instructions

The build instructions below are divided into two parts, namely pre-assembly and final assembly. In the pre-assembly some of the sub-assmeblies or parts are either prepared or assembled together to ease the final assembly. The number in the (#) paranthesis denotes the quantity of the part required.

Hardware

Part	Picture
Button Head Cap Screw (BHCS)
Socket Head Cap Screw (SHCS)

1. Smooth idler pulley
2. Teethed Idler pulley
3. Teethed Drive pulley
4. Heatset insert
5. Grub screw
6. L bracket
7. 3030 angle connector
8. Allen wrench
9. Flat head screwdriver
10. Cross head screwdriver

Pre-Assembly

---

1. Y-axis Left Pre-assembly (1)

Parts required

1. XY Idler Assembly Left (1)
   1. Printed XY Idler - Left (1)
      1. M3 Nut (2)
      2. M3x20mm bolt (1)
   2. M3x30mm bolt (1)
   3. 3mm Bore GT2 Pulleys (2)
   4. M3 shim washer (4)
2. XY Stepper Motor Assembly Left (1)
   1. Printed Stepper Motor Bracket - Left (1)
      1. M3 Nut (1)
      2. M3x20mm bolt (1)
   2. Nema 17 Motor (1)
   3. GT2 20T Teethed 5 mm Bore Drive Pulley (1)
   4. M3x8mm SHCS (1)
   5. M3x10mm SHCS (2)
3. 10mm dia 340mm long Smooth Rod (1)
4. LMW10U Bearing (1)