BM

docs/machines/3DPrinter/Step by Step Assembly.md

@@ -4,17 +4,17 @@ The build instructions below are divided into two parts, namely pre-assembly and
 
 ## Hardware
 
-| Button Head Cap Screw (BHCS) have a cylindrical head with a hex slot and require an allen wrench  | Socket Head Cap Screw (SHCS) have a round head with a hex slot that requires an allen wrench | DIN 433 Washer are thin precise washers that are used as spacers between idler pulleys | Teethed Idler Pulley have the toothed side of a timing belt moving on it |
+| Button Head Cap Screw (BHCS)  | Socket Head Cap Screw (SHCS) | DIN 433 Washer  | Teethed Idler Pulley |
 | ---- | ---- | ---- | ---- |
-| <img src="pictures/hardware_bhcs.PNG" width="250" /> | <img src="pictures/hardware_shcs.PNG" width="250" /> | <img src="pictures/hardware_washer.PNG" width="250" /> | <img src="pictures/hardware_teethed_idler.PNG" width="300" /> |
-| **Button Head Cap Screw (BHCS)** - These screws have a hex head and require an allen wrench | **Socket Head Cap Screw (SHCS)** - These screws have a hex head that require an allen wrench | **DIN 433 M3 Washer** - Thin precise washers that are used as spacers between idler pulleys | **Teethed Idler pulley** - The toothed side of a timing belt moves on a teethed idler pulley | 
+| <img src="pictures/hardware_bhcs.PNG" width="250" /> | <img src="pictures/hardware_shcs.PNG" width="250" /> | <img src="pictures/hardware_washer.PNG" width="250"  /> | <img src="pictures/hardware_teethed_idler.PNG" width="250" /> |
+| **BHCS** have a button shaped head with a hex slot and require an allen wrench | **SHCS** have a cylindrical head with a hex slot and require an allen wrench | Thin precise washers that are used as spacers between idler pulleys | Teethed idler pulley has free rolling bearings and the toothed side of a timing belt moves on it |
 
+| Smooth Idler Pulley | Drive Pulley | Heatset Insert | Set Screw |
+| ---- | ---- | ---- | ---- |
+| <img src="pictures/hardware_smooth_idler.PNG" width="300" /> | <img src="pictures/hardware_drive_pulley.PNG" width="300" /> | <img src="pictures/hardware_heatset_insert.PNG" width="300" /> | <img src="pictures/hardware_setscrew.PNG" width="300" /> |
+| Smooth idler pulley has free rolling bearings with the smooth side of the backside of a timing belt moves on a smooth idler pulley | Drive pulley sits on a motor shaft and is always teethed. Comes with two set screws that need a allen wrench to tighten the pulley onto the shaft | Heatset inserts have ridges on the outside and a female thread on the inside. They are pressed into printed parts using a soldering iron | Set screws are headless screws with external threads and a hex key on one side. Found on drive pulleys and in the L brackets to join two aluminium profiles |
 
-| **Smooth idler pulley** - The smooth side of the backside of a timing belt moves on a smooth idler pulley | <img src="pictures/hardware_smooth_idler.PNG" width="300" /> |
 
-| **Drive pulley** - Sits on a motor shaft and is always teethed. Comes with two set screws that need a ##1.5 allen wrench | <img src="pictures/hardware_drive_pulley.PNG" width="300" /> |
-| **Heatset insert** - Brass insert with ridges on the outside and a female thread on the inside. They are pressed into printed parts using a soldering iron | <img src="pictures/" width="300" /> |
-| **Set screw** - Headless screws with external threads and a hex key on one side. Found on drive pulleys and in the L brackets to join two aluminium profiles | LINK | 
 | **L bracket** - L shaped connector with 2 set screws, used to connect two profiles at a right angle | LINK |
 | **3030 angle connector** - Aluminium connectors that connect profiles on the plane. Each angle connector requires 2 SHCSs and 2 hammer nuts | LINK |
 | **Allen wrench** - Tool with a hex head to tighten Socket head cap screws SHCS | LINK |