- Place glass plate on aluminium heatbed and install 4x glass clips to hold glass in place
### 6.6 Slide build platform onto Z axis smooth rods
### 6.6 Screw lead screw nuts on lead screws
Parts
- 2x trapezoidal lead screw nuts
Instructions
- Screw the lead screw nuts onto the lead screws with flange side facing top of printer
### 6.7 Slide build platform onto Z axis smooth rods
Parts
...
...
@@ -426,9 +437,9 @@ Parts
Instructions
- Insert the pre-assembled build platform into the 8mm smooth rods
- Insert the pre-assembled build platform into the 8mm Z-axis smooth rods
### 6.7 Installing lead screw nuts
### 6.8 Installing lead screw nuts
Parts
...
...
@@ -442,8 +453,9 @@ Tools
Instructions
- Screw down lead screw nuts from top of lead screws untill they reach the printed Z nut bracket on build platform
- With build platform on bottommost position, rotate both lead screws till their starting threads are on same starting point
- Screw up lead screw nuts from bottom of lead screws untill they reach the printed Z nut bracket on build platform
- With build platform supportde on two 70.5mm printed spacers (or any two similar printed spacers), rotate both lead screws till their starting threads are on same starting point
- rotate and adjust the lead screw nuts till the holes on the lead screw nuts and the printed Z nut brackets align
- Insert 2x M3x12mm SHCS into holes of each lead screw nut and fasten with M3 nuts on bottom side
