updated

docs/machines/3DPrinter.md

@@ -603,38 +603,27 @@ The surface finish of 3d printed parts is generally good other than some ringing
    3. Left side to right side connection
    4. Corner brackets installation
 2. Z-axis lower mounts
+   - M3x25 Bolts (1)
+   - M3 Nut (1)
+   - M5x10 Bolts (2)
+   - M5 Hammernut	(2)
 3. 12mm rods insertion
 4. Build Platform Installation
 5. Z axis upper mounts
-
-Part Qty	Part	Sub Part	Fastener	Fastener Qty
-
-
-| Part Qty | Part | Sub Part  | Fastener  | Fastener Qty |
-|:-----------------:|:-------------|:---------------:|---------------:|
-| Z axis upper mounts|-------------| -------------   | M3x25 | 1      |
-| -------------|-------------| -------------         | M3 Nut      | 1      |
-
-{: .custom-class #custom-id}
-
-
-
-
-5.3 M5x10	2
-5.4 M5 Hammernut	2
-				
-
-
-1. Y-axis (L & R)
-2. X-axis Assembly
-3. XY Belt Installations
-4. Y Axis End Stop Installation
-5.  X-Y Cable Chain Installation
-6.  Electronics plate
-7.  PSU Mounting
-8.  Connect Wiring
-9.  Exhaust system
-10. Enclosure Panels
+   - M3x25 Bolts (1)
+   - M3 Nut (1)
+   - M5x10 Bolts (2)
+   - M5 Hammernut	(2)
+6. Y-axis (L & R)
+7. X-axis Assembly
+8. XY Belt Installations
+9.  Y Axis End Stop Installation
+10. X-Y Cable Chain Installation
+11. Electronics plate
+12. PSU Mounting
+13. Connect Wiring
+14. Exhaust system
+15. Enclosure Panels