eduts

docs/machines/3DPrinter/Step by Step Assembly.md

@@ -59,39 +59,39 @@ The build instructions below are divided into two parts, namely pre-assembly and
 
 #### Step 2 - Insert 2x M3 nuts into printed XY Idler bracket.
 
-![M3 nuts](pictures/xy_idler/edited/C1_xy_idler.png)*Figure 2: Insert M3 nuts*
+![M3 nuts](pictures/xy_idler/edited/C1_xy_idler.PNG)*Figure 2: Insert M3 nuts*
 
-![M3 nuts](pictures/xy_idler/edited/C2_xy_idler.png)*Figure 3: M3 nuts inserted*
+![M3 nuts](pictures/xy_idler/edited/C2_xy_idler.PNG)*Figure 3: M3 nuts inserted*
 
 #### Step 3 - Insert M3 bolts
 
-![M3 bolts](pictures/xy_idler/edited/C3_xy_idler.png)*Figure 4: Insert M3 bolts*
+![M3 bolts](pictures/xy_idler/edited/C3_xy_idler.PNG)*Figure 4: Insert M3 bolts*
 
-![M3 bolts](pictures/xy_idler/edited/C4_xy_idler.png)*Figure 5: M3 bolts inserted*
+![M3 bolts](pictures/xy_idler/edited/C4_xy_idler.PNG)*Figure 5: M3 bolts inserted*
 
 #### Step 4 - Insert first GT2 Pulley
 
-![Pulley1](pictures/xy_idler/edited/C5_xy_idler.png)*Figure 6: Insert Pulley in bolt*
+![Pulley1](pictures/xy_idler/edited/C5_xy_idler.PNG)*Figure 6: Insert Pulley in bolt*
 
-![Pulley1](pictures/xy_idler/edited/C6_xy_idler.png)*Figure 7: Pulley inserted*
+![Pulley1](pictures/xy_idler/edited/C6_xy_idler.PNG)*Figure 7: Pulley inserted*
 
 #### Step 5 - Insert M3 Shim Washers
 
-![washers](pictures/xy_idler/edited/C7_xy_idler.png)*Figure 8: Insert washers in bolt*
+![washers](pictures/xy_idler/edited/C7_xy_idler.PNG)*Figure 8: Insert washers in bolt*
 
-![washers](pictures/xy_idler/edited/C8_xy_idler.png)*Figure 9: Washers inserted*
+![washers](pictures/xy_idler/edited/C8_xy_idler.PNG)*Figure 9: Washers inserted*
 
 #### Step 6 - Insert second pulley in bolt
 
-![Pulley2](pictures/xy_idler/edited/C9_xy_idler.png)*Figure 10: Insert second pulley in bolt*
+![Pulley2](pictures/xy_idler/edited/C9_xy_idler.PNG)*Figure 10: Insert second pulley in bolt*
 
-![Pulley2](pictures/xy_idler/edited/C10_xy_idler.png)*Figure 11: Second pulley inserted*
+![Pulley2](pictures/xy_idler/edited/C10_xy_idler.PNG)*Figure 11: Second pulley inserted*
 
 #### Step 7 - Tighten M3x30mm bolt
 
 - Do not tighten to the point that the pulleys cannot spin freely!
 
-![Pulley2](pictures/xy_idler/edited/C11_xy_idler.png)*Figure 3: Second pulley inserted*
+![Pulley2](pictures/xy_idler/edited/C11_xy_idler.PNG)*Figure 3: Second pulley inserted*